How to Repair a Garden Hose

Fix leaky garden hoses quickly and cheaply.

Every editorial product is independently selected, though we may be compensated or receive an affiliate committee if you lot buy something through our links. Ratings and prices are authentic and items are in stock equally of time of publication.

Fourth dimension

An hour or less

Complexity

Beginner

Cost

$five–10

Introduction

There is zero more frustrating than a leaky garden hose. Half your water goes down the storm drain or onto your shoes and not on your backyard. Information technology doesn't have to be that way. Read on to acquire some quick, inexpensive and easy garden hose fixes.

Tools Required

Materials Required

  • Garden hose repair couplings

Project pace-by-step (five)

Step 1

Where is the Leak?

  • If water is leaking from either end of the hose, such as at the faucet or spray attachment, the fix could be as simple equally replacing the safe washers in the female person stop of the hose and or spray attachment.
  • If a leak is within a foot of the male or female connectors, cutting off the end of the hose and replace the connector.
  • If the leak is in the center of the hose, cut out the damaged department and splice the hose back together with a repair coupling.

Garden Hose Washer

Step 2

Measure

  • Earlier heading to the hardware shop for repair parts, mensurate what size garden hose you have. The three common sizes of garden hose are 1/2-, 5/viii-, and three/4-inch. That is the ID (inside diameter) of the hose.
  • The OD (outside diameter) is typically 1/8-inch larger than the ID. So a v/8-inch hose has a 3/4-inch OD.

Hosesize

Step 4

Four Easy Repairs

Clamp Hose Menders

  • Replace the ends or splice the middle of a hose with clinch hose menders. Once you have the damage department cut off the hose, stick the barbed end of the repair fitting into the hose. Bend the tangs downward and into the hose, squeezing it evenly with a pair of pliers, channel locks or vice grips.

Clenchhosemenders

Clampingtangs

Clamp Couplers

  • Clamp couplers for ends and splicing hoses are another like shooting fish in a barrel hose ready.
  • Remove the screws and cover from the coupler.
  • Stick the spinous cease into the hose.
  • Supervene upon the comprehend and tighten the screws.

Clampcoupler

Tightenclampcoupler

Hose Clamps

  • Hose clamps and a 3-inch piece of one/2-inch copper tubing work well for a splice repair.
  • Slip a hose clamp over the stop of the cutting hose.
  • Insert the i/two-inch slice of copper tubing into the hose, letting ane-i/two inches stick out. At present, tighten the hose clamp with a screwdriver.
  • Slip some other hose clamp over the end of the other piece of cut hose. Insert the 1/ii-inch piece of copper tubing and tighten the clamp with a screwdriver.

Hoseclampinsert

Tightennuts

Pinch Mender

  • Compression mender probably is the easiest garden hose set.
  • Unscrew and split the collar from the repair fitting.
  • Skid the collar over the hose.
  • Push the repair fitting onto the hose, and then spiral and tighten the neckband to the repair fitting.

Compressionmender

Pace 5

Test for Leaks

  • Connect the hose to the faucet and turn it on, checking for leaks.
  • If a repair leaks, try tightening the screws or neckband on the plumbing fixtures.

Hoseleak2

Originally Published: August 06, 2022